countersunk screw

countersunk screw
A screw with a special head. The underside of the head is tapered to fit into a hole that has tapered sides (countersunk hole) so that when the screw is screwed in all the way, the top of the screw is flush with the surface

Dictionary of automotive terms. 2015.

Игры ⚽ Поможем решить контрольную работу

Look at other dictionaries:

  • screw — [1] A spiral path along a cylinder. [2] A fastening device. A screw is like an inclined plane wrapped up. It can take a rotating force and change it into a much larger straight line force. See adjusting screw aiming screw air bleed screw air… …   Dictionary of automotive terms

  • countersunk — ˈkau̇ntə(r)+| adjective Etymology: from past participle of countersink (I) 1. : having a countersink at the top a countersunk hole 2. : having the head set in a countersink …   Useful english dictionary

  • Screw — This article is about the fastener. For other uses, see Screw (disambiguation). Screws come in a variety of shapes and sizes for different purposes. U.S. quarter coin (diameter 24 mm) shown for scale. A screw, or bolt, is a type of fastener… …   Wikipedia

  • Countersunk — Countersink Coun ter*sink (koun t[ e]r*s[i^][ng]k ; 277), v. t. [imp. & p. p. {Countersunk} ( s[u^][ng]k ); p. pr. & vb. n. {Countersinking}.] 1. To chamfer or form a depression around the top of (a hole in wood, metal, etc.) for the reception of …   The Collaborative International Dictionary of English

  • countersunk hole — noun A hole which is drilled into a surface, so that when a screw is inserted, the screw head is level with the surface …   Wiktionary

  • List of screw drives — Contents 1 Common types 1.1 External types 1.1.1 Square 1.1.2 Hex …   Wikipedia

  • 600 series connector — A 600 series connector is an obsolete three pin connector with up to six conductors. It was for many years the standard telephone service (POTS) connector in Australia, but has now been replaced by the six position modular connector in this… …   Wikipedia

  • DD68 Redux — Redux with extended grip Specifications Type Mechanical …   Wikipedia

  • Countersink — A countersink is a conical hole cut into a manufactured object, or the cutter used to cut such a hole. A common usage is to allow the head of a countersunk bolt or screw, when placed in the hole, to sit flush with or below the surface of the… …   Wikipedia

  • Washer (hardware) — Assorted washers: flat, split, star and insulated A washer is a thin plate (typically disk shaped) with a hole (typically in the middle) that is normally used to distribute the load of a threaded fastener, such as a screw or nut. Other uses are… …   Wikipedia

Share the article and excerpts

Direct link
Do a right-click on the link above
and select “Copy Link”